Job Description: ZAC Crewmember
The primary purpose of this position is to effectively and
safely work in the ZAC cell producing necessary components and
performing production related duties while meeting production
levels and maintaining good quality.
* Demonstrate a solid and complete understanding of the ZAC
process and duties. * Be able to keep up with production and
fluently move from one task to the next. * Assist with training and
have a good eye for quality. * Maintain good attendance. * ZAC 2.0
base assembly at a consistent production rate of 600 parts per hour
while meeting quality standards. * ZAC 2.0 regular stiffener
assembly at a production rate of 85 parts per hour while meeting
quality standards. * ZAC 2.0 side lite stiffener assembly at a
production rate of 120 parts per hour while meeting quality
standards. * ZAC 2.0 cap assembly at a production rate of 120 parts
per hour while meeting quality standards. * Demonstrate full
knowledge of the ZAC 2.0 cap laser (program changes, understanding
of different programs, etc.) while being able to consistently meet
production levels. * Able to effectively produce ZAC 2.0 kits. *
Understand how to manually apply ZAC 2.0 stiffeners and understand
the quality expectations of this task. * Understanding of the ZAC
2.0 stiffener machine and able to effectively run this machine and
keep up with customer demand.
JOB KNOWLEDGE: Entry level position. Does not require previous
knowledge, will receive training to achieve desired level.
JOB SPECIFICATIONS/EXPERIENCE: Approximately 6 months of work
experience is required to become skilled in all phases of the job.
Must be capable of reading a tape measure (8th 16th 32nd) while
performing simple addition and subtraction. Must have the ability
to effectively communicate orally and in writing due to
accountability of production reporting.
INITIATIVE & INGENUITY: Work priorities are determined by
updated production board, line leaders or supervisor instructions.
The crew member is responsible for quality checking the raw
materials and sub-assemblies frequently. Be capable of working with
other crew members while following verbal and written
SUPERVISION RECEIVED: Under specific direction of Assembly line
or department leader, Assembly Supervisor and Plant Manager, where
goals and objective are established. Coordinate work with other
crew members. Report any material handler deficiencies. Advise
leads/supervisor of unusual circumstances as needed.
RESPONSIBILITY FOR ERRORS: Errors may be serious involving
inventory and will become apparent in normal production runs.
CONTACT WITH OTHER: Regular contact with crewmembers, other
employees, lead people and staff members where improper handling
may affect results. Clear, concise communications skills are
PHYSICAL EFFORT: Flow of work and character of duties involve
performing repetitive hand motions and capable of standing for the
entire shift. Normal and corrected hearing and vision are necessary
with manual coordination. Frequent walking, some bending, twisting,
stooping, climbing stairs and lifting of up to approximately 35
lbs. are required. Must have good hand eye coordination and be
mechanically adaptable to using hand tools.
The physical demands described here are representative of those
that must be met by an employee to successfully perform the
essential functions of this job. Reasonable accommodations may be
made to enable individuals with disabilities to perform the
RESPONSIBILITY FOR EQUIPMENT: In order to advance this position
will be required to become capable of limited troubleshooting all
equipment on the line and a complete understanding of the ZAC
processes. Damage to this equipment would result in a loss for the
WORKING CONDITIONS/HAZARDS: Exposed to normal factory
environment (wood dust and aluminum) with no factors or hazards
present to a disagreeable extent. Must be able to with stand heat
up to 95 degrees.
SAFETY RESPONSIBILITIES: Must adhere to all safety rules and
regulations as specified in the Enduras Safety Manuel. This
responsibility necessitates wearing of proper personal protective
equipment (i.e. safety glasses & ear plugs) by each crewmember on
OTHER REQUIREMENTS: This job includes other duties and
responsibilities assigned by management. Regular attendance is
essential to any position with